Posts : 239 Join date : 2010-02-05 Age : 47 Location : OH
Subject: Grizzly Shocks Thu Jun 09, 2011 8:09 pm
What settings do you have your Yamacliner factory shocks set on?
Ruger
Posts : 1634 Join date : 2010-02-01 Location : Off the Grid
Subject: Re: Grizzly Shocks Thu Jun 09, 2011 9:13 pm
One notch up from the softest setting.
wacker
Posts : 4055 Join date : 2010-01-30 Location : S/C PA
Subject: Re: Grizzly Shocks Thu Jun 09, 2011 9:26 pm
3rd setting on all four corners
Prairie Pounder
Posts : 984 Join date : 2010-02-05 Location : Go Bucks!
Subject: Re: Grizzly Shocks Fri Jun 10, 2011 2:00 pm
Factory. With the typical weight the bike carries...fuel pack/winch up front~~gear/tools in the back~~ the factory setting seems to be the right balance for my quad.
wacker
Posts : 4055 Join date : 2010-01-30 Location : S/C PA
Subject: Re: Grizzly Shocks Mon Jun 13, 2011 10:33 pm
Bascom wrote:
What settings do you have your Yamacliner factory shocks set on?
So, what's your thoughts or idea
Bascom
Posts : 239 Join date : 2010-02-05 Age : 47 Location : OH
Subject: Re: Grizzly Shocks Tue Jun 14, 2011 5:28 am
When Nicki was riding it we had it set at the first setting on all 4 corners.
Now that I'm the one riding mainly I stiffened up the front up to 4 and the back is till on 1. That doesn't seem too bad, but I think I want to stiffen up the back a little more.
Subject: Grizzly Shocks 
Thu Jun 09, 2011 8:09 pm
