New to Me anyway

Spindle cracked that held the ball joint in place, replaced the bearing, yea, loose already. Went oem, see how long this lasts.

Cleaned out the primary clutch, and pulled the intake and cleaned it, idles much better, really black.

Practice on the diff mr ed, mines next

Stop by sometime and I'll show it to you. Parts are on back order until the 17th. Diff is just laying on the work bench

Thanks ed, appreciate that, what evening works best for you?

At this time about any day next week

After trial and error with revision A,  here is rev B.  Moved the radio forward, tilted to view radio display, tilted and tucked the speakers higher to provide more helmet room. Able to keep the amp installed also. Still need to install some type of dome light.

Went with stock size Roctanes over Bighorns (GasP) Mr. ED, see how they ride...

I'll be in the market for a set sooner or later, hope sooner

Installed the new flux capacitor... not as bright as expected. Wife doesnt like the pitch black during trail pitstops.

Nice... Similar to the LED strips their using to make the light 'rod' poles ?

You have a picture of it lit up in the dark ?

Is that mounted above the windshield or the roll bar behind the seat?
.
The yellow flexible head led magnetic flashlight I use with a std battery pack is $65 on ebay now
I bought another one from this guy after running over my first one
The magnet is unbelievably strong and it stays in place above my head when riding

http://www.ebay.com/itm/371210699613?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

The 16' strips on ebay for 12 dollars.. waterproof as well. strung it around the top of the cage but didnt like the look just wrapped the rear bar. No nite pics yet wacker.