Project Razr

Was out shopping for a new box yesterday am
( the Contico box leaks and I was tired of cleaning wet crap out of it after every ride )
Saw this for $68 - only $10 more than the one I was looking at that was 1/2 the size
It should hold all kinds of rain gear ( And extra Polaris parts  : ) no problemo



Infringing on Krusty's space a little bit

Put the windshield in , Rain x on both sides
Forgot all about having it and that I was going to order a marine wiper motor ,
Now it's too late to get one before the ride .
Still have the squeegee and washer solvent spray bottle

If I can find enough plastic line and a switch I may install this washer pump & tank I have
( I volunteered to work tomorrow so time is short )



And I peeled off that hideous dewalt sticker and installed the correct one on the left side .
There is room for a QCR sticker on the right side

Windshield looks familiar. I think that box might be big enough. Curious as to how you hold it in. Where you going to mount the washer container?

Mr.Ed wrote:

Windshield looks familiar. I think that box might be big enough. Curious as to how you hold it in.  Where you going to mount the washer container?

Box is ratchet strapped in on lower part .
It is way big but for extra $10 why not . It comes out easily ..
Going to be wet this coming week so I want to have a nice dry jacket & sweat shirt to change into if need be ..
Washer bottle can go anywhere , has flexible fill pipe so I can bury it , maybe behind drivers seat or rf pass side footwell area ..
Could you post / send me pic of your wiper set-up ?

Been thinking about this wiper setup
Company located in Lancaster Pa
Schmitt Ongaro 31014
With 14 inch arm and blade
And heavy duty 3 position rocker switch- fits right in dash slot

That's the motor Sportsman Are I are using, but single speed with auto park. Ill get a pic. and tx to you

Don't have your # for tx. but I put mine on the top !7" over and 3" down from the top looking at it from front to rear

To come -
Ordered a set of Polaris 800s fender extensions ,
Going to manufacture MudFlaps on the extensions .
In process of finding the right deal on a steering rack ( Stripped out internally at the end of day 3)
Ordering wiper motor and arm
(Rain-X on inside and outside worked great on the windshield - rained 3 of the 4 days riding and water beaded & just rolled off- the old Gas stn squeegee was all I really needed )




Brake pads at the ready
Need to get fluids ready
Time for a big maint & inspection - almost 1000 miles on it since I started .
The Box had more than enough room for all gear and a dead body , too !

Acquiring spare parts for future failures
Going to have this thing awhile - ( Got the rears last year & used most of it already during the rebuild )
Front Hubs , Spindles , Wheel bearings , axles , brake rotors , lugnuts ....

Went to Lancaster Sport Cycle this am to check out their clearance rack bargain hunting ;D
Saw this complete factory Polaris skid pan set , had an order date of 9-2011 so it's been sitting since then in their store.
asked if they would take $200 cash today and they agreed so it is mine
Originalee $500 , saved $300 & also
Saved my a$$ a lot of fabrication work this afternoon as I was making new skid pans for the RZR

Nice Find

After repairing multiple stripped bolt holes , drilling out broken bolts , drilling & tapping several new bolt holes
Finalee they're installed

Turned out good